 |
| Place of Origin: | Beijing, China (Mainland ) |
| Brand Name: | TOPLASER |
| Certification: | TUV CE |
| Model Number: | CO2-2B |
| Minimum Order Quantity: | 1 Set/Sets |
|---|---|
| Packaging Details: | 73*66*130cm Strong wood case |
| Delivery Time: | 3-10working days |
| Payment Terms: | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
| Supply Ability: | 800 Set/Sets per Month |
| High Light: | kin rejuvenation resurfacing,fractional laser treatment |
||
|---|---|---|---|
scanning and normal mode CO2 fractional Laser Machine CE approved
Application
1. Skin renewal and regeneration
2. All colors tattoo removal
3..Remove all kinds of wrinkles
4. Remove acne and scars
5. Remove neoplasms
6. Remove pigment
7.Treat telangiectasis
8. Sun damage recovery and skin renewing
9. Actenic keratoses
10. Face lift, tighten and whiten skin
11. Pierce ears
12. Effective treatment with skin hydroponic, skin rough
Specifications
|
General Specification |
Wavelength |
10.6μm, far-infrared laser |
|
Aiming Beam |
Less than 2mW, red semiconductor laser |
|
|
Scan Mode |
Laser Energy |
5-45mj, step value 5mj |
|
Figure Option |
1. Square or rectangle, min 3×3mm; max 20×20mm, step value 1mm. 2. Round, min 3mm (diameter), max 20mm (diameter), step value 1mm. 3. Ellipse, min 3×8mm, max, 15×20mm, step value 3mm. |
|
|
Energy Repeat |
1-5 (When increasing energy repeat, laser energy is increased synchronously, max total energy 225mj.) |
|
|
Dot Density |
36/49/64/100/144/225 dots in 1cm2 |
|
|
Mode |
Normal: scan sequentially line by line. Random:scan randomly, to decrease thermal accumulation. This function is not available for rectangle. |
|
|
Normal Mode |
Laser Energy |
1-30W, step value 1W |
|
Super (Pulse) |
1. Average power: 1w~30w; 2. Pulse frequency: 300Hz~950Hz optional |
|
|
Single(Pulse) |
1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional |
|
|
Continuous Wave |
1w~30w |
|
|
Repeat |
1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional,off time1ms |
|
|
Dimension |
73*66*130cm |
|
|
Weight |
50Kg |
|
Advantages:
1. The TUV medical CE approved;
2. Normal and scan mode for choice;
3. Far-infrared laser Aiming beam
4. metal Tube is imported from U.S.A
5. The lifetime of the machine is more than 20,000 hours
6. Fan cooling, do not need to add water.
7. Particular designed intelligent laser control system ensures a precise treatment
8. RF-exited CO2 laser energy shooting is an even steady and safe treatment process.
9. Wide range application, effective treatment
CO2 Fractional Laser System fires a laser beam which is then split into numbers of microscopic beams, producing tiny dot, or pixel-like treatment zones within the selected target area of the skin, leaving the other zones within it perfectly intact. Therefore, the heat of laser only passes deeply through the factional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.
1. Skin with problems before treatment 2. Fractional laser works on the skin
3. Thousands of mirco-thermal zones are 4. More collagen is produced during
produced activate skin resurfacing. self-resurfacing.
Contact Person: Mr. li
Tel: 66668888
